For the most ideal cycle dependability, PantaTec has now built up another programmed dosing gadget. The additive is presented by pneumatic infusion rule in the ideal amount straightforwardly into the blasting media. In a 70 liter supply, the added substance is kept flowable by a stirrer and filled into the characterized dosing chamber. A concise blasts of compressed air blasts the additive through the feed line and the infusion spear straightforwardly into the blasting media in the container and atomizes it simultaneously. The infusion spear is situated in the center progression of the blasting media, for example straightforwardly in the feed stream to the blasting wheels or pressure vessel. The blasting media takes the added substance with it and is blended in with it. Promptly , the additive takesits effect and strips a way oils and greases.
Dosing Control
The dosing units is connected with the control
unit of the blasting machine in such a way that additive is added uniquely during the dynamic blasting
activity. With centrifugal wheel blasting machines, the control signal is utilized for the conclusion
component, and with pressure air-blasting frameworks the exchanging sign of the can transport. The ideal
volume of added substance is entered in plain content through the presentation of the dosing control from 0
– 5 l/h.
One needs approx. 0.5 – 1 liter of added substance per blasting wheel and blasting hour, and with pr. air
impacting ca. 0.5 – 1 liter for each blasting tube.
The filling level screen reminds the operator so as to separately top up a complete bag of additive(50
liters). The filling is done physically by pouring a complete bag of ULTIMATE in the storage container.
Installing of the doeing unit, floor standing
The doser can be introduced effectively and with little exertion at practically any blasting machine,
likewise consequently.
To begin with, the blasting medium hopper should be discharged. On the impacting medium hopper , a 1 opening
(breadth 51 mm) is cut in a side wall and 6 mounting openings (distance across 9 mm) are bored. A relating
penetrating format is remembered for the conveyance scope. The infusion spear is put in the center
progression of the blasting medium and is in a bad way onto the side wall on the clipping spine.
PantaTec INJECTO Unit